Free shipping on orders over $99.99! Don't miss out!
Product Details

TotalBoat Thixo Wood 2.0 is a thickened epoxy adhesive that provides the same strength, convenience, and reliability of the original Thixo 2:1 epoxy system, but cures to a dark brown, wood-colored finish. It is ideal for filleting as well as stitch & glue bonding for wooden boat construction and restoration.

Thixo Wood 2.0 can be used both above and below the waterline on all types of wood. Once cured, the hardened epoxy is 100% waterproof, sandable & paintable.

This convenient point and shoot system comes in an easy to use 185ml adhesive cartridge that fits most standard caulking guns. Optimal working temperatures range from 55-80°F.

Made with over 25% renewable materials!

Each cartridge of Thixo Wood 2.0 includes two free static mixing tips. Additional tips sold separately.

Note: For use in manual caulking guns only. Do not use with pneumatic gun.

Tech Specs
PHYSICAL PROPERTIES VALUE TEST METHOD
ColorBrownVisual
Hardness, Shore D82ASTM D2240
Tensile Strength, psi7,200ASTM D638
Tensile Modulus, psi437,000ASTM D638
Tensile Elongation, %6.2ASTM D638
HDT, Post Cured, Degrees F132ASTM D648
Compressive Strength, psi9,800ASTM D695
Flexural Strength, psi10,100ASTM D790
Flexural Modulus, psi413,000ASTM D790
Tensile Adhesion, Wood, psi1,390ASTM D4541
HDT, Room Temp Cure (deg F)124ASTM D648
Cured Density (lbs/in3).042ASTM D792
Volumetric Yield (in3/lb)23.7ASTM D792
Volumetric Shrinkage (%)3.5ASTM D792/D1475
PHYSICAL PROPERTIES VALUE TEST METHOD
Resin Density @ 77degF (lb/gal)9.2ASTM D1475
Hardener Density @ 77degF (lb/gal)8.4ASTM D1475
Resin Color - Part ABrownVisual
Hardener Color - Part BDark BrownVisual
Mix Ratio by Weight100A:46BCalculated
Mix Ratio by Volume2A:1BCalculated
Gel Time @ 77degF, 150g mass (mins)50ASTM D2471
Vertical Sag Resistance (in)3/8Vertical Surface
Handling Time of Bead/Glue Joint (hrs)6-8
Full Cure (days)3-7
Working Temperature (deg F)55-80
Info & Guides

    NOTE: Thixo cartridges have a slightly offset nozzle that fits most, but not all, caulk guns. Caulking applicators used with Thixo need to have a hole large enough for the mixing tip; cartridges won't fit applicators with only a small hole for the nozzle. For best results, use a caulk gun with an 8 to 1 thrust ratio or higher.

Technical Information

  • Surface Prep Solvent: Acetone or denatured alcohol or TotalBoat Eco Solvent
  • Cleanup Solvent: Acetone or denatured alcohol; cured material must be removed mechanically

WARNING: This product can expose you to chemicals including bisphenol A, which is known to the State of California to cause female reproductive toxicity. For more information, go to www.P65Warnings.ca.gov