Free shipping on orders over $99.99! Don't miss out!
Product Details

We've made Thixo even better! Thixo Fast Cure is stronger and cures over three times faster than standard Thixo. This 2:1 thickened epoxy adhesive provides the same great benefits. 185ml cartridges fit most standard caulking guns. Simple point-and-shoot dispensing lets you apply a bead of Thixo Fast Cure with a squeeze of the handle. Included mixing tips ensure the correct ratio of resin to hardener, and eliminate messes or waste.

Fast Cure is ideal for bonding applications above and below the waterline, as an adhesive on wood, metal, or fiberglass. Note: Not for use as a Gap filler & cannot be applied with a material thickness over 1/2." Cartridges sold individually with 2 mixing tips included. Additional tips are sold in pairs or quantity of 12.

Sandable & ready for high loads in only four hours.

Note: For use in manual caulking guns only. Do not use with pneumatic gun.

Tech Specs
PHYSICAL PROPERTIES Value Test Method
ColorBuffVisual
Hardness, Shore D82ASTM D2240
Tensile Strength (psi)8,500ASTM D638
Tensile Modulus (psi)372,000ASTM D638
Tensile Elongation (%)7.4ASTM D638
HDT, Post cured (deg F)133ASTM D648
Compressive Strength (psi)9,600ASTM D790
Flexural Strength (psi)13,200ASTM D790
Flexural Modulus (psi)393,000ASTM D790
Tensile Adhesion (wood) (psi)1,380ASTM D4541
Tensile Adhesion (aluminum) (psi)1,890ASTM D4541
Tensile Adhesion (G10) (psi)2,030ASTM D4541
HANDLING PROPERTIES Value Test Method
Resin Density at 77 F (lbs/gal)9.6ASTM D1475
Hardener Density at 77 degrees F, lbs/gal8.6ASTM D1475
Resin Color - ABuffVisual
Hardener Color - BAmberVisual
Thixotropic Index, 1/10RPM7.9
Mix Ratio by Weight100A:46BCalculated
Mix Ratio by Volume2A:1BCalculated
Gel Time at 77 degrees F, 150 gram mass, min10ASTM D2471
Vertical Sag Resistance, in.1-2ASTM D2471
Info & Guides

    NOTE: Thixo cartridges have a slightly offset nozzle that fits most, but not all, caulk guns. Caulking applicators used with Thixo need to have a hole large enough for the mixing tip; cartridges won't fit applicators with only a small hole for the nozzle. For best results, use a caulk gun with an 8 to 1 thrust ratio or higher.

Technical Information

  • Surface Prep Solvent: Acetone or denatured alcohol or TotalBoat Eco Solvent
  • Cleanup Solvent: Acetone or denatured alcohol; cured material must be removed mechanically