APPLICATION AND USE - SEAM COMPOUND BROWN 30

Preparation Seams must be clean and dry; free from dirt, oil, grease, sanding residue or other contamination. Extra wide seams should be first filled with caulking cotton. Before applying Seam Compound Brown, all seams must be primed.

PRIMING: Thin first coat of Interlux antifouling bottom paint of choice 10-15% by volume. Allow to dry overnight before proceeding with Seam Compound Brown 30.

Method Apply using a spatula or putty knife. Work material into all voids, on very wide or deep seams a second application may be necessary.

Hints Do not thin. Remember that shrinkage will occur when adding solvents.

Some Important Points Do not use above the waterline. Product temperature should be minimum 10 deg C/50 deg F and maximum 29 deg C/85 deg F. Ambient temperature should be minimum 10 deg C/50 deg F and maximum 35 deg C/95 deg F. Substrate temperature should be minimum 10 deg C/50 deg F and maximum 29 deg C/85 deg F.

Compatibility/Substrates Do not apply to bare wood. Apply to clean, dry, properly prepared surfaces only. For use below the waterline only. Do not use under vinyl based antifouling paints such as VC Offshore or Baltoplate.

Number of Coats As required

Coverage (Theoretical) - 60 (sq ft/Gal) yields 60 mils

Application Methods Knife / Spatula

APPLICATION AND USE - SEAM COMPOUND WHITE 31

Preparation Seams must be clean and dry; free from dirt, oil, grease, sanding residue or other contamination. Extra wide seams should be first filled with caulking cotton. Before applying Seam Compound White 31, all seams must be primed.

PRIMING: Thin first coat of White Undercoater 279 or Brightside Primer 10-15% by volume. Allow to dry overnight before proceeding with Seam Compound White 31.

MethodApply using a spatula or putty knife. Work material into all voids, on very wide or deep seams a second application may be necessary.

Hints Do not thin. Remember that shrinkage will occur when adding solvents.

Some Important Points Do not use below the waterline. Product temperature should be minimum 10 deg C/50 deg F and maximum 29 deg C/85 deg F. Ambient temperature should be minimum 10 deg C/50 deg F and maximum 35 deg C/95 deg F. Substrate temperature should be minimum 10 deg C/50 deg F and maximum 29 deg C/85 deg F.

Compatibility/Substrates Do not apply to bare wood. Apply to clean, dry, properly prepared surfaces only. For use above the waterline only.

Number of Coats As required

Coverage (Theoretical) - 60 (sq ft/Gal) yields 60 mils

Application Methods Knife / Spatula