These yellow foam roller covers are intended for use with gloss or semi-gloss coatings and finishes. Foam roller covers will not leave lint or stipple behind. Sold in packs of two.
- Note: These rollers work well with urethanes, polyurethanes, paints, gelcoat, and primers, but some users have reported that they are not solvent-resistant enough for some epoxy applications. If superior solvent resistance is a requirement for your project, consider the related West System 8002 roller cover listed below.
Frequently Purchased Together
Recommended Products
Reviews for Foam Roller Covers
Verified Purchase
roller was spiral wound foam sheet on a cardboard tube. The spiral joint was not sealed/bonded and distorted quickly under use. The 3inch versions were saw cuts of a larger size such that the cardboard ends were jagged with little chards hanging off. These easily broke off and messed up the paint job when rolling. Had to switch over to a 4 inch solid foam roller bought from the box store
Was this review helpful to you?
These are spiral glued to a cardboard core. The foam delaminates from the spiral. The gaps leave lines of more thickly applied paint. The edges disintigrate, leaving bits of foam behind. Buy something else. These don't deserve to be sold by JD.
Was this review helpful to you?
Verified Purchase
I wanted to test it for applying epoxy coatings on wood strip canoes I am building. This thin foam brush cover works very well.
Was this review helpful to you?
Verified Purchase
These are generic and not Arroworthy brand as advertised and the quality is below average
Was this review helpful to you?
Using for 2 part epoxy primer. The seams leave marks and then fall apart after applying about 4 oz of primer. Afraid to use on the finish coat. Suggest JD/Totalboat stock a 1/8 " one piece foam roller
Was this review helpful to you?
Verified Purchase
Get a few extra.
Was this review helpful to you?
Verified Purchase
Used this to apply top coat primer and it worked excellent
Was this review helpful to you?
Verified Purchase
These foam rollers work fine for one part urethane and mild primers but not for the two part epoxy primers! they will fall apart and leave foam bits all in your paint job. Definitely leave a smoother finish when using paint though
Was this review helpful to you?
Verified Purchase
I used these rollers for high gloss bright finishing. The coverage was good but the roller foam started delaminating at the end of the final pass--good thing I was almost done & could brush-tip the glob of varnish that rolled out. Recommend product with some reservations...
Was this review helpful to you?
I ordered the 9 inch roller covers to get a smooth finish on topside paint. Covers are spiral wound on the core and have separated at the seam leaving gaps. Customer support said "that is strange, if you like we can send you replacements. These are very popular and we never hear complaints." The replacements had the same defect, to which customer support responded "must be how it is with these rollers. I don't blame you for not wanting to use them for a smooth top coat paint project"
Was this review helpful to you?
