The standard 17 oz double Bias fiberglass cloth by Vectorply is an E-BX 1700-10 (+/-45deg) with a total weight of 17.92 oz/sq.yd (608 g/sq.yd). This high quality biaxial fiberglass cloth provides more strength than standard 12 oz double bias cloth, but with some added weight.
The cloth helps to bulk up on strength without requiring multiple layers, and it impregnates easily. The weave is retained by a thin polyester stitching which holds the perpendicular 45 deg tows in place without affecting structural integrity.
Experience fantastic results while used during wet lay-up, vacuum bagging, or infusion. The 50" wide cloth is sold by the yard or roll (125 yd).
| Ultimate Stress | E-BX 1700 Resin Infused | E-BX 1700 Open Mold |
|---|---|---|
| Longitudinal Tensile | 66 KSI | 49 KSI |
| Longitudinal Compression | 66 KSI | 49 KSI |
| Transverse Tensile | 66 KSI | 49 KSI |
| Transverse Compression | 66 KSI | 49 KSI |
| In-Plane Shear | 11 KSI | 8 KSI |
| Longitudinal Flexion | 79 KSI | 58 KSI |
| Transverse Flexion | 79 KSI | 58 KSI |
- *Please specify if continuous lengths are required. This is usually the standard for all of our composites, however when reaching the end of a roll, orders may be completed in multiple lengths to total the ordered quantity.
Technical Information
<b>Notes</b>
- Resin infused laminate made with poly / vinyl ester resin blend
- Open mold laminate made with poly / vinyl ester resin blend
- All Standard reinforcements should be infused with a flow aid or Vectorfusion reinforcements.
Frequently Purchased Together
Recommended Products
Reviews for Fiberglass Cloth - 17 oz Biaxial
Verified Purchase
Great delivery of this product and very good quality!
Was this review helpful to you?
Verified Purchase
I'm building a dory to row the Grand Canyon in March and we used this cloth for the hull protection
Was this review helpful to you?
Verified Purchase
I purchased the 17 oz biax to use in the repair of the transom on our Bayliner 3270. The repair included plywood and epoxy, and in order to properly reinforce the new plywood it is necessary to use 45 degree biax when tabbing to the hull. I found the Vectorply to superior to other cloth I have used in the past, and found that it layed in the corners easily, absorbed the epoxy quickly, and was generally easy to work with. There are alot of loose threads if you have to cut strips as I did, but no worse than any other matting. Note that cutting this cloth will dull scissors very quickly - you'll need quality tools if you have to piece a lot of it out.
Was this review helpful to you?
