- Home
- / Paints
- / Topside Paint
Pettit EZ-Decks Non-Skid Deck Paint is a super tough polyurethane non-skid performance deck finish, containing a special grit that produces a slip-resistant finish on all decks and cabin soles.
Easy to apply, EZ decks yields a durable weather and abrasion (wear from foot traffic) resistant finish. Ultraviolet filters resist fading while providing superior color retention that will stay vibrant for years without peeling or cracking like other deck finishes.
Available in three popular colors that match up perfectly with Pettit Easypoxy topside enamel.
| Dry Time | To Touch | To Recoat |
|---|---|---|
| 90 Deg. F | 1-1/2 | 8 |
| 70 Deg F | 3 | 16 |
| 50 Deg F | 6 | 24 |
- VEHICLE TYPE: Oil modified polyurethane
- FINISH: High-gloss
- COMPONENTS: 1
- CURING MECHANISM: Air dry/oxidation
- SOLIDS (theoretical):
By weight...71.0 +/- 2%
By volume...54 +/- 2% - COVERAGE: 600 sq. ft/gal.
- VOC: 375 g/l max.
- FLASH POINT: 113 degrees F
- APPLICATION INFORMATION:
Stir thoroughly before use. The non-skid agent in this product will float to the surface in the container and must be stirred thoroughly. May be applied by brush or roller. For brush or roller application, apply without thinning, although in hot weather, 5 to 10% of Pettit 120 Thinner may be added to maintain a wet edge. For best results on large, smooth surfaces roll out using a short nap or foam roller followed immediately by leveling off with the tip of a brush. Do not apply on extremely humid days (90% RH or above) or when rain is threatening. Do not apply in late afternoon when working outdoors as the wet film may be adversely affected by dew. When working in cooler temperatures, be sure the air and surface temperatures will remain at or above 50 degrees for at least eight hours after application.
- SURFACE PREPARATION:
Coating performance, in general, is proportional to the degree of surface preparation. Follow recommendations carefully, avoiding shortcuts. Inadequate preparation of surfaces will virtually assure inadequate coating performance. Surface must be free of dirt, loose paint, rust, oil, grease, wax, soap and any other foreign matter.
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Frequently Purchased Together
Recommended Products
Reviews for Pettit EZ Decks - Non-Skid Deck Paint
Verified Purchase
painted the deck of my 1979 23 ft seacraft and it has great coverage and goes on easy and looks great
Was this review helpful to you?
Verified Purchase
This paint goes on easily and the media spreads out very evenly. Two thin coats like the can says is the way to go. On the down side, I wish it was not a gloss paint, and it seems to mildew quickly.
Was this review helpful to you?
Verified Purchase
Difficult to apply an even coating of non skid paint. Particles clump in the paint despite vigorous mixing. Far better to use regular deck paint and sprinkle non skid particles upon it for an even coat. Cover with a second coat.
Was this review helpful to you?
Verified Purchase
We have used Pettit EZ Poxy paints on 2 different boats now and can't say enough good things about them. Easy to paint with. Great coverage.
Was this review helpful to you?
Verified Purchase
This is a great, easy to use non-skid paint. I was amazed how easy it was to put on the deck and how well it has held up so far. You do not have to be a professional painter to use this and get professional results. Just follow the directions and you will not have any problems and the end result is great. Excellent non-skid for boats. I would definitely recommend it.
Was this review helpful to you?
