Free shipping on orders over $99.99! Don't miss out!
Product Details

TotalTread is a ready-mixed, slip-resistant polyurethane non-skid deck paint with unique Propyltex™ wax texturing agents. The rounded shape of Propyltex™ waxes provides optimum gloss control and is less abrasive compared to silica texturing agents found in most non-skid deck paints or additives.

Apply TotalTread by brush, roller, or spray equipment. You will love the grippy, but not abrasive, high-traction surface. Apply a second coat for even more grip.

Available in Quart and Gallon sizes in four colors: Sand Beige, Kingston Gray, and White (which match our TotalBoat Wet Edge Topside paint colors), and Light Gray, which is a lighter, less blue gray than Kingston Gray.

Tech Specs
Specifications TotalTread
Thinning (Brush/Roll Application) Can be thinned 5-10% with TotalBoat Special Brushing Thinner 100, if needed.
Thinning (Spray Application) Thin with TotalBoat Spray Thinner 101, typically 10-20%. Thinning percentage varies by sprayer type and conditions.
Cleanup TotalBoat Special Brushing Thinner 100, TotalBoat Spray Thinner 101, or TotalBoat Dewaxer & Surface Prep
Primers TotalBoat Topside Primer, TotalBoat 2-Part Epoxy Primer (Metals), TotalBoat TotalProtect (Fiberglass/Metals), TotalBoat Aluminum Boat Barrier Coat (Metals)
Application Temperature 50-90°F
Application Relative Humidity (RH) 0-90%
Recommended Number of Coats 1-2 thin coats
Coverage 250-300 sq. ft. per gallon
Info & Guides
    Most non-skid deck paints rely on a 'sand' silica additive to provide grip. While they are certainly effective at providing secure footing, they have a few drawbacks: Scrub your deck too hard and the additive can become visible, leaving unsightly dark specks. The shape of traditional additives doesn't bond well with the paint, and the finish doesn't last all that long.

    Our TotalTread is formulated to address these issues. Instead of a hard irregular shaped silica grit agent, TotalTread's wax rubber spheres are shock absorbing to give the finish some elasticity. The paint sticks better, and the finish looks better longer. It's easier to clean and won't wear away from scrubbing. And, because it's still a 1 part finish, it's easy to apply.

    IMPORTANT APPLICATION NOTE

    TotalBoat TotalTread should be applied in thin coats. 1-2 thin coats are recommended, for best results.

    HOW TO RECOAT TOTALTREAD FOR MAINTENANCE PURPOSES

    To apply maintenance coats of TotalTread after a few years of use/exposure, clean/dewax the surface and lightly scuff it with 220-grit or 320-grit sandpaper or a maroon Scotch-Brite pad. Scuffing will naturally knock some of the grit down. If it really needs to be sanded heavier, you'll be able to judge that as you're doing it. If anything, the grit usually wears down after a few years, making it a little easier to sand, but would require at least one, maybe two coats of TotalTread for a more true color and desired texture.

WARNING: This product can expose you to chemicals, including titanium dioxide and ethylbenzene, known to the State of California to cause cancer, as well as chemicals, including ethanol, known to the State of California to cause developmental toxicity. For more information, go to www.P65Warnings.ca.gov