- Home
- / Paints
- / Topside Paint
EPF-YE001750 -- 750 mL - Cream
EPF-YE002750 -- 750 mL - Beige
EPF-YE003750 -- 750 mL - Wheat
EPF-YE004750 -- 750 mL - Sand
EPF-YE006750 -- 750 mL - Tropic Green
EPF-YE008750 -- 750 mL - Dark Blue
EPF-YE011750 -- 750 mL - Dado Brown
EPF-YE012750 -- 750 mL - Dark Brown
EPF-YE014750 -- 750 mL - Mahogany
EPF-YE016750 -- 750 mL - Red
EPF-YE018750 -- 750 mL - Light Gray
EPF-YE019750 -- 750 mL - Black
EPF-YE019F750 -- 750 mL - Black Flat/Matte
EPF-YE021750 -- 750 mL - Orange
EPF-YE023750 -- 750 mL - Deep RedEPF-YE024750 -- 750 mL - Light Oyster
EPF-YE025750 -- 750 mL - Alpine White
EPF-YE027750 -- 750 mL - Gray Mist
EPF-YE028750 -- 750 mL - Water Blue
EPF-YE029750 -- 750 mL - Ocean Blue
EPF-YE030750 -- 750 mL - Teal Green
EPF-YE034750 -- 750 mL - Chocolate Brown
EPF-YE035750 -- 750 mL - Red Brown
EPF-YE040750 -- 750 mL - Off-White
EPF-YE048750 -- 750 mL - Light Green
EPF-YE062750 -- 750 mL - Atlantic Green
EPF-YE065750 -- 750 mL - Deep Green
EPF-YE072750 -- 750 mL - Dark Green
EPF-YE075750 -- 750 mL - Malachy Green
EPF-YE082750 -- 750 mL - Down East TanEPF-YE084750 -- 750 mL - Persian Red
EPF-YE205750 -- 750 mL - Deep Blue
EPF-YE206750 -- 750 mL - Blue Gray
EPF-YE210750 -- 750 mL - Antique IvoryEPF-YE212750 -- 750 mL - Gray
EPF-YE213750 -- 750 mL - French Gray
EPF-YE214750 -- 750 mL - Dark Gray
EPF-YE216750 -- 750 mL - Pearl Gray
EPF-YE217750 -- 750 mL - Light Blue
EPF-YE218750 -- 750 mL - Jade GreenEPF-YE026750 -- 750 mL - Buff
EPF-YEUW750 -- 750 mL - Ultra White
EPF-YEW750 -- 750 mL - White
EPF-YE037750 -- 750 mL - YellowEpifanes Yacht Enamel is one-part, alkyd-based, traditional marine finish. The mirror-like gloss, color retention, and intensity of this enamel surpass the traditional topside paints. It's longevity, surface hardness and flexibility prove it is the ultimate finish for wood, fiberglass, steel, and aluminum.
The color selection surpasses your imagination from white to black. Epifanes yacht coatings are noted for their easy application and durability.
- Container Size: All colors 750 ml. White also available in 2000 ml. and 4000 ml.
- Gloss: Ultra high gloss
- Density: 0.95 - 1.30 kg./liter (dependent on color)
- Solids Content : 50 - 55 +/- 2 vol. % (dependent on color)
- Drying time: at 65F / 65% RH: Tack free - 3 hours / Tape free - 24 hours Dry - 24 hours / Recoatable - 24 hours
- Recommended Film Thickness: Per coat wet - 60-70 micron / Per coat dry - 30 - 35 micron
Technical Specifications
Temperature should be between 50 degrees F and 85 Degrees F with the air humidity below 85 percent. Avoid painting in too much wind or sun. A rapid loss of solvents will occur under these conditions and will decrease the flowing ability. Add thinner up to the specified percentage to compensate for the faster release of solvents. Epifanes Yacht Enamel is compatible with most other types of one-component alkyd or urethane paints and over two-component paints.
Frequently Purchased Together
Recommended Products
Reviews for Epifanes Yacht Enamel
First, I have to say we put on a roll & tip, very smooth glossy finish that people think is sprayed or fiberglass. To say the least we are very fussy. If you're painting a pretty small boat hull, then could be workable. Did a lot of research, watched videos (lots of them) hoping to gain in site as to how this particular paint is applied. But a 43ft S&S sailboat hull (1958 wood)...then forget it on our part. A 200 man hour job would had been a total disaster using this paint in a the roll & tip method. Inside an open air building, no wind with humidity was around 40%, 10% thinner...no way enough. Painted the transom first as a test (trying to save the engine turned gold leaf name with frisket cover)...well it went on like tar & never flowed out. We could never ever recommend this paint. I guess some like it, but we could never say that & we've worked with some difficult paints/varnishes over the decades. As we all know formulas change because of the EPA regs...you learn tricks to deals with those issues each product processes...but this yacht enamel was one of those products we won't ever consider using in the future.
Was this review helpful to you?
Verified Purchase
Goes very far. Does need 2 coats. Never expected it to be that good
Was this review helpful to you?
Verified Purchase
I live on the Chesapeake Bay. I use Epifanes yacht enamel for a number of exterior painting projects on my property including doors and some trim on my home. It is remarkably tough paint in a marine environment. Looks great for years !!
Was this review helpful to you?
Verified Purchase
Used to replace decal boot stripe. It worked very well.
Was this review helpful to you?
Verified Purchase
I used it for boot stripes replacing decals which fade, peel and look cheap. Best decision I could make. As always, prep is everything. The yacht enamel is very high quality. Jamestown tech was very helpful with instructions
Was this review helpful to you?
Verified Purchase
I restored a 19 37 Old Town Canoe. Spent several hundred hours restoring the canoe. Wanted a specially good paint job so I've tried epiphanes in the past and it's worked well. Goes on smooth and dries in less than 48 hours. Recommend this product anytime you want a great paint job.
Was this review helpful to you?
Verified Purchase
I painted my interior bulkheads and interior hull and frames with Epifanes yacht enamel. This has a luster and shine that makes me smile with happiness.
Was this review helpful to you?
Verified Purchase
I actually haven't used the paint yet. I'm sure its what I'm looking for. In fact I would like you to send me another quart. Thks lMudge
Was this review helpful to you?
Verified Purchase
Use the Persian Red on a museum ship because it is close to the historic colors. This is top quality enamel paint, and you pay for it!
Was this review helpful to you?
Verified Purchase
Used this paint on the support structure for teak benches on waterfront landing
Was this review helpful to you?
