The Megaware KeelGuard attaches to powerboat keels to provide protection against abrasive sand, rocks, concrete ramps, oyster beds and other underwater hazards.
Similar in concept to a traditional sacrificial rub strake used on dinghies for dragging up the beach, KeelGuards easily attach to your boat with a strong adhesive bond and readily adapt to hull contours for seamless protection.
Unprotected keels risk incurring gelcoat damage. Even small dings in gelcoat finishes can allow moisture intrusion that ultimately damages fiberglass laminates. Not just a protective device, KeelGuards also maximize efficient water flow to maintain like-new performance like top speed, handling, and tracking on smaller boats and personal watercraft.
| Item # | Color | Length' |
|---|---|---|
| KLG 20106 | White | 6 ft |
| KLG 20108 | White | 8 ft |
| KLG 20206 | Black | 6 ft |
| KLG 20208 | Black | 8 ft |
| KLG 20306 | Almond | 6 ft |
| KLG 20308 | Almond | 8 ft |
| KLG 20506 | Gray | 6 ft |
| KLG 20508 | Gray | 8 ft |
KeelGuards are generally mounted 4 to 6 inches above the waterline on the bow, ending 2 to 3 feet beyond the lowest point of the keel. Everything needed to professionally install is included, and step-by-step instructions are located under the links section of this page.
Note: If your trailer is designed such that the entire weight of the boat rests on rollers or a support beam along the keel, we do not recommend installing a KeelGuard. If the rollers can be lowered or the side bunks raised to clear the keel protector, the adhesive bond will not be compromised. May not be suitable for some aluminum boats with reinforced rib design.
See instructions to achieve proper high strength bond to hull surface.
Recommended Products
Reviews for Megaware KeelGuard
Verified Purchase
More primer.
Was this review helpful to you?
Installed in less than an hour.
Was this review helpful to you?
Easy to install.
Was this review helpful to you?
Haven't tested it long enough to see if it is durable yet. Prep work wasn't excessive and application was fairly simple. Not sure what the problem would be if the keelguard has weight resting on it at the pads.
Was this review helpful to you?
Great product, does exactly what it's made to do. Just take your time and install it properly. Installs easily.
Was this review helpful to you?
I installed my new Megaware Keelguard in under an hour. It was fairly simple some prep (very important) is required. I am very pleased and would consider buying it again. The 3M 5200 is a little messy to work with and takes a few days to cure but, an added advantage.
Was this review helpful to you?
