Epifanes epoxy primer is a two-part primer with excellent adhesion and filling properties. May be used above or below the waterline. Provides a hard, strong base for the application of Epifanes Polyurethane Coatings. Epoxy Paint primer can be used on plywood and fiberglass, as well as an anti-rust primer in a two-component paint system on steel and aluminum.
- Container Size: 750 ml. (100 parts comp. A to 14 parts comp. B by weight).
- Color: White
- Gloss: Semi Gloss
- Density: 1.82 kg/liter (mixed)
- Solids Content : 50 +/- 2 vol. %
- Drying times at 65F / 65% RH: Tack free - 12 hours / Full Cure - 7 hours Dust Free - 45 min / Recoatable - 12 hours
- Recommended Film Thickness: Per coat wet - 80 micron / Per coat dry - 40 micron
- Application: Brush, roller, conventional air spray, H.V.L.P.
Technical Specifications
Temperature should be between 50 degrees F and 85 degrees F during application with the air humidity level below 85 percent. Avoid painting in too much wind or sun. A rapid loss of solvents will occur under these conditions and will decrease the flowing ability.
Frequently Purchased Together
Recommended Products
Reviews for Epifanes Epoxy Primer
Verified Purchase
I have used this two part primer several times with good results. Somehow with my most recent purchase I somehow lost the hardener ( part B) after using a very small amount of primer. I contacted Epifanes to see if they would sell me just part B. No luck now I am stuck with a mostly full can . Going in the trash.
Was this review helpful to you?
Verified Purchase
Primer worked great. I would use it again.
Was this review helpful to you?
