Rubin Abrasive 2 sheets for the Festool DS 400 DS Delta Sander with Stickfix hook and loop attachment. Rubin 2 sandpaper is typically used for sanding bare soft and hard woods, sanding composite materials, and sanding paints and varnishes.
StickFix is the Festool brand name for hook and loop (H&L) sandpaper, 4" x 6".
50 sheets per pack
| Item Number | Grit | Quantity |
|---|---|---|
| FES-499133 | P40 | 50/bx |
| FES-499134 | P50 | 50/bx |
| FES-499135 | P80 | 50/bx |
| FES-499136 | P100 | 50/bx |
| FES-499137 | P120 | 50/bx |
| FES-499139 | P180 | 50/bx |
| Rubin 2 Applications | Suggested Grit | Process Level |
|---|---|---|
| Wood | P24 - P60 | heavy duty |
| Wood | P80 - P120 | intermediate |
| Wood | P150 - P180 | prep for finish |
- Use grits P24 to P60 for rapid removal and rough surface quality. High material removal means low surface quality. This preps surfaces for higher grits.
- Use grits P80 to P120 to accomplish intermediate sanding. You will still have a fast removal rate while achieving good surface quality.
- Use grits P150 to P180 for finish sanding. Remember that soft wood does not require as fine a sanded finish as hardwood. If you want to sand wood higher than P180, use Brilliant 2 from P220 to P400. Sanding higher that P180 is not recommended for stains, as they will not penetrate as readily.
Tip
Use coarser grits for faster results; avoid skipping grits for best surface quality. The wood-specific coating for the Rubin abrasives means that they are long lasting.
Rubin 2 abrasive was developed for natural wood, wood composites and veneers. Rubin has a special coating which sheds wood fibers. Use on hardwoods like oak or maple, soft woods like pine or fir, tropical woods like ebony or teak, as well as on wood-based products.
