Hutchins Longboards are lightweight, flexible, and rugged. They feature a cushioned surface with spring clips at each end. Longboards are used to cover large areas when sanding and finishing to save time and energy. Use 2-3/4" x 17-1/2" Paper or 2-3/4" x 16-1/2" PSA (pressure sensitive adhesive) sandpaper.
Flexible Long Board
Use 2-3/4" x 17-1/2" Paper or 2-3/4" x 16-1/2" PSA.
Frequently Purchased Together
Recommended Products
Reviews for Hutchins Flexible Longboard 2-3/4 inches wide x 16 inches long
I purchased Wet Edge Two part epoxy primer, Wet Edge Top coat and Wet Edge Faring Compound. I am restoring a 1964 17 foot Boston Whaler. I used the products on the Whaler with great success. When i called the sraff was very knowledgable and helpful.
Was this review helpful to you?
Verified Purchase
Works well. Essential tool for fairing
Was this review helpful to you?
Verified Purchase
I'm using this to fair a 24' boat hull I'm building. It works good and it comffortable. I wish it could have been about 4" longer for this project but still adequate enough to use. For longer ones I make my own.
Was this review helpful to you?
As said in another review of this product..... the long board is fine. The sandpaper that Jamestown is recommending is not long enough unless you cut the cushioned surface front and back..... You would think that Jamestown would do better in matching a suitable paper to the board .... Shame
Was this review helpful to you?
I attempted to use this product with 2-3/4 x 17-1/2 long board sand paper and was not succeesful. It will utilize PSA paper. To use the longer paper one needs to cut the rubber foam backing from the ends and under the clip.
Was this review helpful to you?
great for smoothing filler material on contoured surfaces
Was this review helpful to you?
