Sikaflex 291 LOT is an all purpose elastic adhesive, used to bond floors to subfloors or metallic frames, exterior or interior panels, bonding trim moldings to hull etc. Long open time. The 10.3 oz cartridge pictured above is used in conjunction with an inexpensive caulking cartridge gun. The 3 oz size comes in a squeeze tube and does not require a cartridge gun.
- Density: 10.3 lb/Gal
- Tack Dry: 3-5 hours
- Rate of Cure: 1/4 in x 1/4 in bead 14 days at 40 deg F/60 percent RH
1/4 in x 1/4 in bead 7 days at 73 deg F/50 percent RH
1/4 in x 1/4 in bead 2 days at 73 deg F/90 percent RH
1/4 in x 1/4 in bead 3 days at 100 deg F/40 percent RH - Shore A Hardness (ASTM D2240): 40 to 45
- Elongation at break (ASTM D4132): 700 percent
- Tensile Strength (ASTM D412): 200 psi
- Lap sheer strength (ASTM D1002): 120 psi
- Peel Strength: 30 lbs/in on fiberglass, 25 lbs/in gelcoat
- Application temperature: 40-110 degrees F
- Service Range: -40-180 degrees F
- Colors: White, Black and mahogany
- Sandable, paintable, waterproof
- Shelf Life: 15 months
- Technical Specifications
Frequently Purchased Together
Recommended Products
Reviews for Sikaflex 291 LOT
Verified Purchase
In the last year, I used both the black and mahogany colors on my antique boats. Caulking seams, Mounting hardware, Attaching decks, Etc.
Was this review helpful to you?
Verified Purchase
I used it for a semi-off label project to fill topside gaps created on my 1931 Chris Craft due to moving it from (relatively humid) New York to (very dry) Colorado. It took a little experimentation to find a workable process. It was not as "sandable" as I might have liked and time will tell how the varnish holds. Product was slightly damaged in shipping but useable. I recommend better protecting the nozzle which had poked through a corner of the shipping box.
Was this review helpful to you?
Verified Purchase
My last two projects I did the bottom seams with 291 Lot 1952 Penn Yan CZT Swift 1924 Single Stepped Hydroplane
Was this review helpful to you?
Verified Purchase
Sikaflex 291 is amazing, I used it to make a seal on a 24'' steel irrigation valve cover, I followed the drying instructions by building a large humidor maintaining 50 to 80 percent humidity at 70-80 degrees. I had the opportunity to get water early so the dry time was five days, put cover on cranked it down irrigated, checked Sikaflex 291 seal...PERFECT. I was expecting the lower ring to cut into the new seal but to my surprise it didn't even dent it. The seal is 5/8x1/2'' thick, the best thing I saved over 100 bucks.
Was this review helpful to you?
Verified Purchase
I'm in the marine industry and this product is standard in use, in Canada we can't get Mahogany coloured Sikaflex, so Jamestown is my go to place for it.
Was this review helpful to you?
Verified Purchase
Used it to seal my deck. So far so good
Was this review helpful to you?
Verified Purchase
We used this product to adhere urethane-based foam to wood and carbon steel substrates. Bond is performing well. No issues.
Was this review helpful to you?
Used for bedding the recessed lap joints in Adirondack guideboat planking. The long open time (LOT) is a plus. Just be sure to remove the squeeze out while it is still flowable. Also get it off your hands immediately with a solvent (acetone works) or you will have to wear it off after it cures. Using latex gloves is a better (and safer) idea. Once cured, it is like soft rubber and seals as designed.
Was this review helpful to you?
Verified Purchase
durability,functional
Was this review helpful to you?
Verified Purchase
WE used the Sikaflex 291 LOT for caulking the deck seams on our antique runabout. The Sika brand is the preferred and the best product for the job. However the LOT isn't really what we wanted. The normal or quick cure would have been greatly preferred.
Was this review helpful to you?
