Free shipping on orders over $99.99! Don't miss out!
Product Details

TotalBoat Teak Cleaner is a two-part system that thoroughly cleans and restores the natural golden color and beautiful grain of your boat's teak deck and other teak surfaces. Part A removes sealers, graying, and weathering, and lifts dirt, stains, salt, and mildew. Part B neutralizes Part A and brightens the teak. Kit includes 1 Quart Part A and 1 Quart Part B.

Info & Guides
    Application

    Wet the teak surface to be cleaned. While the surface is wet, apply TotalBoat Teak Cleaner Part A to the teak, disperse the solution and scrub lightly across the grain with a soft-bristle brush or Scotch-Brite pad. The teak will darken with residue that is cleaned from the wood. Never scrub in the direction of the grain, as doing so will remove wood fiber. Rinse thoroughly with water and continue scrubbing lightly across the grain, removing most of the residue. Also, rinse clean any brush or pad used to scrub teak.

    While still wet with fresh water, apply Part B, using the brush or pad to disperse and scrub lightly across the grain. The teak will lose the dark brown color and start to lighten. Rinse Part B off thoroughly with fresh water.

    Allow teak to dry to a light, golden color, at least 48-72 hours. Do not attempt to seal, oil, or varnish during this period.

    The cleaning process may raise the outer grains. If so, a light sanding will take the grains back down. If persistent stains remain after cleaning, perform cleaning process again.

    Caution: Do not allow TotalBoat Teak Cleaner to come into contact with painted surfaces or aluminum surfaces. Mask around the area to be cleaned to prevent staining of surrounding areas.

    If Part A gets onto fiberglass or gelcoat, neutralize with Part B to avoid damage or staining. Do not leave Part B on an caulking or seams for more than 5 minutes without neutralizing with Part B.