MAS Epoxy medium hardener is a polyamine blend intended for moderate activity and resistance to blushing. Moderate pot life gel and thin film set times provide advantages when filleting and fairing.
MAS Epoxy Medium mixes with thickeners, gel and sets quickly enough to avoid draining and sagging, while still allowing ample flow time for controlled application periods.
This hardener is a good choice when overnight sandability is more important than continuous laminating and open time. Won't 'milk out' during application or fog up in critical clear coating applications.
Available in Pint, Quart, Half Gallon, Gallon, 4 Gallon, and 5 Gallon sizes.
- Viscosity at 77 degrees F: 200 cp unmixed, 410 cp mixed
- Specific Gravity at 77 degrees F: .0998
- Flash Point (closed cup): 234 degrees F
- Mix Ratio: 2:1 Resin to Hardener
- Mixed Viscosity at 77 degrees F: 400-500 cps
- Pot Life at 77 degrees F: 12 minutes
- Thin Film Set Time at 77 degrees F: 3 hours
- Full Cure: 5 days
- Peak Exotherm at 77 degrees: 340
- Peak Exotherm Time: 15 minutes
- Tensile Strength: 7,350 psi
- Tensile Modulus: 395,000 psi
- Technical Specifications
- Performance
Use protective gloves when working with this product. Use soap and water or white vinegar to clean your hands. Use Denatured Alcohol to clean your tools.
Recommended Products
Reviews for MAS Medium Epoxy Hardener
Verified Purchase
GREAT product easy to work with building a hard top for my boat !
Was this review helpful to you?
Verified Purchase
The product is what it is......it is hardener and is messy but very effective. I am taking this survey because the customer service was outstanding!! The fellow (and i wish i could remember his name had a sense of humor which lightened the situation). If you have his name, thank him for an outstanding job! Kurt Humm
Was this review helpful to you?
I'm now working on building my fourth boat using MAS epoxy. The two CLC kayaks from 2000 are still going strong and the Beachpea I just finished looks and sails great. I used the MAS on a set of 8' Pete Culler oars as well as using it to repair my 60 year old Thistle. I've never had an epoxy joint fail.
Was this review helpful to you?
Provides good open work time
Was this review helpful to you?
